Did the Cold Weather Damage Your Pool?

Many regions had cold blasts hit this winter that were more severe than the norm. Many swimming pool owners may have had their pools freeze over, creating concern over damage to the pool. The problem with freezing and pools is that not all damage will be immediately evident; it may take some time before issues arise from cold weather damage. If your pool was exposed to freezing weather this winter, there are some components that may need examination to check for damage.

Components Susceptible to Freeze Damage

Any component with water inside can be damage when cold-snaps hit unexpectedly. While colder regions are prepared for these occurrences, pool owners in the southern states do not often need to worry about freezing. If you had colder than normal weather this winter, you should have a full inspection done of your pool components. Some of the most common to be cracked due to freezing include:

  • Heaters
  • Chlorinators
  • Pumps
  • Filters
  • Valves
  • Pipes and fittings
  • Skimmer

Check any equipment above ground for cracks or damage; they are the most likely to freeze and crack during cold weather. You can look for leaks and monitor your pool system to ensure that everything is working correctly. Not all damage will be visible, but it can lead to problems with your pool once swimming season resumes. Finding issues now can give you time to have them repaired before the warmer weather arrives and it is time to open your pool for regular use.

If you are not sure whether you had any damage to your pool from winter, call your local pool service. They can perform a complete inspection to ensure all components are working correctly and repair any issues that old man winter caused.

Posted on behalf of:
Somar Pool Service & Repairs
4581 Weston Road
Weston, FL 33331
(954) 840-8544

Top 3 Things That Can Damage Your Pool Surface

Is your pool surface stained or faded, chipped or dingy? While quality pool surfaces can last for several years or more with excellent maintenance, they will eventually get damaged. Stains will occur; both inorganic and organic substances will cause discolorations. Plus, other elements can damage your pool’s surface. Here are the top three factors that damage the surface of your pool over the years.

  1. Algae and plant material. Leaves, algae and other organic materials can stain your pool surface. You may find brown, green, blue or red stains from these organic substances. Keeping your pool clean is the best way to avoid these types of stains; they can be difficult to remove once they occur.
  2. Sun exposure. Not all pool surfaces are fade-resistant. Many will fade and become dull over years in the sun. The best way to prevent this damage is to resurface with a fade-resistant material that will keep its luster, even after many years in the sun.
  3. Minerals and chemicals. Minerals and chemicals in the water, plumbing equipment and even in the pool surface can cause changes in the color and quality of your pool’s surface. Copper, manganese, iron and cobalt are all common culprits that can stain your pool.

Wear, tear and traffic will also damage your pool’s surface. The higher quality surfaces are more adept for resisting wear, lasting years longer than cheaper materials.

If your pool’s surface is looking worn, it may be time to resurface. Choose a top-quality surface that has fade-resistant qualities and comes with a guarantee. Talk to your local pool remodel specialist to find the best new surface for your pool. Starting with a quality surface and keeping up with routine maintenance is the best way to keep your pool looking like new.

Posted on behalf of:
Somar Pool Service & Repairs
401 East Las Olas Boulevard #130
Fort Lauderdale, FL 33301
954-800-0780