Benefits of Upgrading Your Pool Pump

September 10th, 2015 Posted in Pool Repairs
Comments Off on Benefits of Upgrading Your Pool Pump

When it comes to keeping your pool clean, your pool pump is the workhorse of the system. Pool pumps filter the pool water, keeping algae and debris out of the water while helping maintain the PH balance. However, if your pump is too small or is not running long enough every day, it may not be getting your pool as clean as you think and actually may be costing you more in energy. Upgrading to a right-sized pool pump is the best way to keep your pool clean and save money off your energy bill.

Right Size, Right Speed

To keep your pool clean, the water in the pool should be cycled through the pump at least once every 12 hours. To do this, you can either have a pump that runs all the time, or have it set to run several hours at a time, then off for several hours. Some people opt to have a larger pump than their pool requires, then try to save energy by only running it part of the day. In the long run, this could be costing more money. The trick is to have the right size pump that can run all day, giving you a clean, efficient pool.

In many cases, a pool company may sell a pump on the “bigger is better” philosophy. That is not necessarily the best option. Instead, a pump that is designed to clean the correct amount of gallons of water over a 12 hour period that can be left on all day can actually save money while cleaning 24-hours a day. These need to be 2-speed or variable speed pumps that can be set at an efficient rate to clean your pool.

If you have a high-horsepower, one-speed pump that you are cycling on and off every day, it may be time to upgrade to a more efficient, right-sized pump. Talk to your local pool service about how a multiple speed pump can keep your pool cleaner and save on energy at the same time.

Posted on behalf of Somar Pools, LLC
Miami Beach, FL
(305) 767-7755

 

, ,
Read More

Does Your Pool Pump Need Repair Or Replacement?

September 25th, 2013 Posted in Pool Repairs
Comments Off on Does Your Pool Pump Need Repair Or Replacement?

Pool pumps like any motor need regular maintenance and repairs to keep working properly. However, just because a pump is having issues does not necessarily mean it needs to be replaced. Parts wear out and need to be replaced, but often these are not nearly as expensive as replacing the entire pump. Knowing the difference can save you hundreds of dollars and extend the life of your pool pump.

Common Pump Repairs

Eventually all pool pumps will need to have parts replaced as wear and tear take their toll. Troubleshooting can give you an idea of what may be wrong and whether it is a pool pump repair issue or if the entire pump will need replacement. Here are come common issues that usually mean the pump can be repaired.

–         Pump leaks. Often times a leaking or even spraying pump is just a matter of replacing the threaded fitting that can become warped over time. Another easy fix is leaks caused by worn out seals. Both these are fairly inexpensive parts and only take about an hour in labor costs to fix.

–         Loud pump noise. If your pump is making a racket, screaming when pumping, there is a good chance that the bearings need to be replaced. These bearings can be replaced, but not repacked as they are usually sealed.

–         Low pumping. If your pump is not pumping the same amount of water as usual, there may be debris blocking the pump basket or the basket may be cracked or broken. These both are usually easy fixes.

Although many problems can be repaired, sometimes the pump just must be replaced. Your local pool service professional can go over your options to find the best solution.

Posted on behalf of Premier Pool Enterprises

Google

, ,
Read More

Swimming Pool Pumps and Filters

May 5th, 2013 Posted in Pool Repairs
Comments Off on Swimming Pool Pumps and Filters

Pool pumps are important! What generates the power to run the filtering system of any pool is its pump. Of course, your pool filter would be virtually worthless without a motor or pump to drive it. Pool pumps today are either single speed, two speed or variable speed pumps. Generally, a two-speed pump will only switch to the higher speed when extra power is necessary, operating for the most part at the lower speed. The lower the speed, the lower your energy bill. A variable pump has multiple speeds than can be set for different needs. If you intend to use your pump on an adjacent whirlpool or spa, or plan to attach a cleaning tool to your motor, then the variable speed option may be just for you.

Likewise, pool filters are an important and necessary part of a pool’s equipment. A filter will help to maintain your pool’s cleanliness while filtering out potentially harmful debris and chemicals. Swimming pool filters typically come in three different types: diatomaceous earth filters (DE), cartridge filters and sand filters. The DE filter provides the purest filtered water back to the pool by running the water through its internal grids coated with powder. Cartridge filters are best used for smaller bodies of water such as a spa. In sand filters, water passes through a mixture comprised of sand and pea gravel.

Whatever type of pump you may have, or type of filter, your local swimming pool service company should be able to provide you with the professional service that your existing system requires. They should also be able to steer you to alternative products that may better meet your individual needs.

 

, ,
Read More

Find Local Company | Find Local Pool Service Companies