3 Types of Swimming Pool Filters

The filtering system for your pool is a vital part of maintenance. The better the filtering system, the easier it is to clean and maintain your swimming pool. There are three main types of swimming pool filters used in residential pools, each with their own pros and cons. However, any of the three will work for most pools; choosing which one is up to the homeowner and usually based on their preference for cost, purification and maintenance.

Sand Filters

The oldest and most affordable type of pool filter uses sand to clean the water as it passes through. Sand filters are popular due to their price and simple maintenance. A tank contains a special pool-filtering sand, usually filled about 3/4 of the way full. The size of the tank depends on the size of the pool. Water flows through the tank, leaving behind contaminants in the sand. The sand must be replaced every 3-5 years, but it should be backwashed to clean out debris once a week or after you vacuum your pool.

Diatomaceous Earth (DE) Filters

DE filters work similarly to a sand filter, with a tank that contains grids or fingers that is coated with diatomaceous earth (DE). This is a natural substance created from sea shells and silica that is released by sea diatoms and works well to filter out debris from water. DE filters offer better purification of the water, filtering out smaller particles than sand or most cartridge filters. However, it does need replacement more often than sand; usually more DE must be added after each backwashing, which should be done every 4-6 weeks.

Cartridge Filters

Cartridge filters are one of the most commonly used in residential pools, especially newer pools. These filters come in single and multiple element cartridges which filter out particles. Cartridge filters can last several years before they need replacement but do need to be cleaned 2-3 times a year and degreased at least once a year for maintenance.

If you are installing a new pool or considering changing your filtration system, contact your local pool service to learn more about your options.

Posted on behalf of:
Premier Pool Enterprises
3502 Sixes Road, #108
Canton, GA 30114
(494) 496-5579

Maintaining a Sand Pool Filter

Sand filters are an economical option for cleaning and maintaining the water in your pool. Rough sand is effective at removing dirt, algae and debris that accumulate in your pool water from swimmers and the environment. Water flows through the container of sand, leaving behind the contaminants in the sand. To maintain your sand filter, you will need to clean it every so often to ensure it keeps working.

Sand Filter Cleaning Frequency

How often you will need to clean your sand filter depends on how much you use your pool and other factors. The number of people that swim in your pool on a regular basis will impact how quickly the filter gets full of debris. Leaves, pine needles, algae and other environmental debris can also clog the filter. To determine when to clean your filter, you need to keep an eye on the filter and your pool water.

  • Filter Indications. Your filter needs to be cleaned when the pressure becomes higher, indicating more dirt is in the sand. For filters that have an inlet and outlet pressure gauge, a psi of 16 or higher means it is time to clean. Filters with just an inlet gauge should be cleaned at 8 psi or higher.
  • Water changes. Another indicator your filter needs to be cleaned is when the water becomes cloudy or unclear. Dirty water is usually caused by a dirty filter.

Cleaning a sand filter requires backwashing your system to force water the opposite direction, pushing out the dirt and debris into the waste water. You can do this yourself or contact your local pool service to clean your pool and sand filter for you.

Posted on behalf of:
Premier Pool Enterprises
3502 Sixes Road, #108
Canton, GA 30114
(494) 496-5579